The place to buy your classic bike Brembo and Dellorto parts on line

dp

dp

New Brembo Parts

10mm copper crush washers, fitting a new caliper ? You really shouldn't re use these especially as they are just 35p each

High Quality M10 x1 Stainless double banjo bolt with 4 crush washers £6.45
 

High Quality M10 x1 Stainlesssingle banjo bolt with 2 crush washers £5.45

Brembo PS15 front caps and bellows 
Now available again. Not Brembo but excellent copy cap and bellows set

£14.95

Carbon Ceramic pads for PO5 callipers. Genuine Brembo. £21.50 a pair (one calliper) 
CC The carbon-ceramic compound has evolved from the previous organic compound, thanks to its higher carbon content. This type of material features good durability, good performance hot and cold, wet and dry. It is has a slightly more progressive initial bite and is slightly less aggressive than the sintered pad and is compatible with both steel and cast iron discs. 
If you want your Brembo’s to stop you like Brembo’s then fit genuine Brembo pads.

 

PO5 Calliper pin sets £7.50

PO5 caliper seal kits £17.75

PO5 Stainless pistons exclusively made for Ducatipaddy by the UK’s leading brake component manufacturer £18.00 each (£36.00 per caliper)
 

P05 caliper parts

P05 pad covers £6.25

P08 caliper parts

Set of 6 stainless cap heads to replace the BZP cap heads used for holding Brembo PO5 calipers together £12.00 set
 

NEW Carbon Ceramic pads for PO8 callipers. Genuine Brembo. £22.50 a pair (one calliper) 
CC The carbon-ceramic compound has evolved from the previous organic compound, thanks to its higher carbon content. This type of material features good durability, good performance hot and cold, wet and dry. It is has a slightly more progressive initial bite and is slightly less aggressive than the sintered pad and is compatible with both steel and cast iron discs. 
If you want your Brembo’s to stop you like Brembo’s then fit genuine Brembo pads.

 

NEW EBC organic pads for Shaved Calipers and cast iron discs. 7.5mm thick especially for P08 shaved SS calipers. £23.95 pair (one disc)

New Brembo PO.8 Calliper seal kit £19.50

Brembo hard anodised piston set P08 £23.95

New Brembo PO.8 Calliper pad covers, twin nipple £4.90 

New Brembo PO.8 caliper cover for single nipple £7.20

PO.9 Caliper seal repair kit
PO.9 callipers are used on the rear of some Guzzi’s, Benelli’s, Laverda’s
£26.95
These are pattern parts fully compatable with Brembo.

NEW P0.8 pin kits bright zinc plate £9.75

P09 Pads.
Genuine Brembo P09 pads, Carbon Ceramic
  £32.00 pair

PO.9 Caliper pistons
PO.9 callipers are used on the rear of some Guzzi’s, Benelli’s, Laverda’s
£29.95 pair
These are pattern parts fully compatable with Brembo.

Set of 6 stainless cap heads to replace the BZP cap heads used for holding Brembo PO5 calipers together £12.00 set
 

P09 caliper parts

These are slightly longer than the P08 version but can also be used on the P08, Zinc plated £8.50 set

Bleed Nipples

PS15 Parts

PS12 Parts

Brembo PS15 rear master cylinder piston and seal kit. Used in some rod operation Master cylinders with remote reservoirs Benelli, Bimota etc £24.50
Brembo Part No. 10377310

M6 x 1 BZP steel Genuine Brembo bleed nipples with rubber boots, supplied in pairs. £9.30 pair
 

 M7x1 nipples,Stainless steel Underside of hex to tip 18mm
Useful if you have stripped your M6 threads in a P08
 £6.25 each

M8x1.25 15mm Genuine brembo black nipples for some P4 SPECIAL OFFER £5.00 each with rubber caps.
 

Replacement o-ring for bowl ps15/17 round front master cylinders £2.95

M10 x 1mm Stainless steel nipples for 4 pot calipers 30/34 single and double pin. £8.00 each
Underside of hex to tip
16mm

M10 x 1mm Bright Zinc nipples for P08 single nipple calipers , genuine Brembo with brembo caps £ 8.75
18 mm from underside of hex to tip  
 

Genuine Brembo  nipple caps one size fits M6, M8, M10. £1.00 each

Bracket for 15ml reservoir used on the clutch side
916/996 and others
Bracket only
£17.50

NEW PS12/13 front and PS15 rear caps with bellows £13.75

PS12 master cylinder kit £23.50

 

PS15 Front master cylinder bowl kit .Pqttern part fully compatable with Brembo parts. £24.95

 Brembo PS15 front and rear master cylinder piston and seal kit £24.50

Modern Brembo parts

Caliper seal kit for P4 30/34 calipers 40mm mount. Comes complete with seals, dust seals, nipples, caps, copper washers. This kit does a pair of calipers. £49.95

Complete piston and seal sets for the very early Brembo 4 pots P4 32/32 D £46.00 per caliper includes 4 pistons, 4 fluid seal, 4 dust seals and 4 bolts with a joining o-ring and grease.

Caliper seal kit for P32F includes seals, dust seals, nipple and cap, copper washers and joining bolts. £36.95

Caliper seal kit for P32G includes seals, dust seals, nipple and cap, copper washers and joining bolts. £36.95

Genuine Brembo clutch/Brake master cylinder kits PS13 P/No. 10436270 Used in the PS13 integral coffin resevoir balck models. £25.45

PS 11C rear master cylinder kit £25.45

PS11A rear master cylinder £25.45

Coffin type later front brake light micro switch without leads.2x spade terminals for Ducati 851 and others, these are brand new genuine Brembo £17.35 each

Genuine Brembo Carbon ceramic pads for 30/34 4 pot callipers double pin 750SS/900SS/ 748/916 etc £24.45 Pair (per calliper)

Genuine Brembo Carbon ceramic pads for 30/34 4 pot callipers Single pin 750SS/900SS/ 748/916 etc £24.45 Pair (per calliper)

15ml remote reservoir with straight outlet common use on rear brake master cylinders with caps and bellows £9.00 each

15ml remote reservoir with angled outlet common use on clutch and rear brake master cylinders with caps and bellows £9.00 each

Bracket for 45ml reservoir used on the brake side
916/996/998/999 and others
Bracket only
£17.50

New Brake reservoir, 45ml std equip on Most Guzzi’s, Ducati 900 916 etc Apr RSV1000 etc £19.95 with cap bellows and screws.

Bracket for remote reservoir used on the brake side on 748/916 and others
Bracket only
£17.50

30ml remote reservoirs single mounting point Great for TT1 or 2 fork top mount £13.50 

New Brake reservoir, 45ml std equip on Most Guzzi’s, Ducati 900 916 etc Apr RSV1000 etc £21.95 with cap bellows and screws. (SMOKE)

Coffin type later front brake light micro switch these are brand new genuine Brembo £17.35 each

Brake line splitter for front. Repro but excellent alloy casting andodised M10x1 std brembo threads £36.00

Brake pad pin retaining R clips
1mm dia Stainless steel, 17mm overall length
£0.95p each

Brake pad pin and clip for single pin 4 pots P4 30/34 calipers £4.75 each

P08 pin set Front/Rear £8.50

Pin and spring set for Rear P32 F £9.95

Pad spring for single pin 30/34 caliper £7.35 each

Pin and spring set for Rear P32 G £9.95

Rubber mount for  fluid reservoir with screw and nut
£15.50

EPDM hose for remote reservoirs. 5mm bore fits std  7mm Brembo remote fittings
Sold as 15cm length with 2 clips  £3.30 or cut to length. Extra clips
  £0.65 each

Brake pad pins and clips for 2 pin 4 pots P4 30/34 calipers £9.95 pair

Rear master cylinder parts

Ducati bevel and Pantah rear master cylinder lever  £24.00

Laverda rear master cylinder lever £24.00

Guzzi PS16 rear master cylinder lever £24.00

Some early ducati LH brake rear master cylinder lever £24.00

Guzzi rear master cylinder lever £24.00

Guzzi rear master cylinder lever bolt Please ask

Pivot pin and circlips for some of the levers above including Ducati and Laverda £4.25

Guzzi rear master cylinder spring £3.95

Guzzi rear master cylinder spring £4.95

Rear master cylinder bellows for push rod masters with remote reservoirs. £4.95

Straight Fuid hose conection for rear master £6.50

Angled hose conection for  rear master £6.50

Bar clamp Gold £12.75

Bar clamp with mirror mount, these come in left hand and right hand thread  for clutch and Brake side. £14.75

Bar clamp black £12.75

Brake pressure switch for Scarab £17.50

Brake pressure switch for Brembo M10 x 1 thread  standard on the front of Laverda and Ducati £14.50

Brake pressure switch for Brembo M10 x 1 thread and a banjo fitting, standard on the rear of Laverda and Ducati £17.50

M10 x 1 Stainless banjo bolt with bleed nipple . If you have trouble bleeding a caliper expecially a twin nipple P08 with a sheared niple then this might help. £19.95

Here we are you lucky customers, paddy has found you PS14 master cylinder kits. If you have a 120 Lav it might well have a PS14 master either front of back, the outer casting is the same as the std PS15 but check the hand stammped numer for 15 or 14

?  £42.00 

Brembo master cylinder socks in Red or Black

£9.95.00 each

Smoked 15ml remote reservoir with angled outlet common use on clutch with caps and bellows, Can be paired with the 45ml smoked brake resevoir above.£14.00 each

Bar clamp commonly used on the Monster clutch side with mirror mount and the small hole to locate the choke assembly, gold only £12.75

Pad pin locator/retainer Brembo some 30/34 calipers £3.75 each

Screw set for the original round PS12/15 mastercylinders £6.95

Pivot and nut for the coffin type resevoir levers £11.50