The place to buy your classic bike Brembo and Dellorto parts on line



Lower fibre glass/plastic section of a rear Darmah mudguard. Keep the crud off your battery


On this page you will find a selection of used cycle and other parts from Ducati twins.  I do my best to show detail on these parts, good and bad, but feel free to request more detailed pictures. The pictures here show the cover I am selling and are not just sample pictures.

If you dont see what you want then its always worth enquiring as I may have one elsewhere or may be able to find one for you.

All parts are used unless otherwise stated

Good Darmah rear mudguard , just needs a clean, no dents. £80.00

LH 900GTS side panel . £65.00

Good pair of wheel/chain adjusters £20.00 pair

Telefix full adjustable 35mm clip ons used, missing end plugs £40.00

Brand New Genuine Veglia speedo drives 29/11 used on some Guzzis. 20mm spindle. £85.00 each

Replacement Veglia speedo drive tangs £6.75

The classic Haynes workshop manual for the wide case Singles £15.00 inc UK shipping

Limited run reprint of the classic Haynes manual covering the later 750 and 860 (not Darmah)

£20.00 with Free UK shipping

These are actually Guzzi LM but will fit anything

£12 pair including UK shipping

Early Darmah clutch perch £50.00 1 only

MV Augusta RH switch gear. New in Box, £95.00 grab a spare while you still can.

Brand new Neutral switch cams Special offer  £21.95 each

Chrome rear light brackets to take the Darmah style CEV rear lights.

Jota ? 750 S3 ?  £35.00 each

Marzocchi fork leg logo 37mm x 18mm

£7.50 pair

Marzocchi fork leg logo  45mm x 24mm

£7.50 pair

Marzocchi fork leg logo  37mm x 18mm

£7.50 pair

Marzocchi shock sticker  60mm x 32mm

£8.50 pair

Special low head Stainless damper rod screw £2.25 each

Marzocchi shock sticker  60mm x 32mm

£8.50 pair

Copper sealing washer for the damper rod screw above. £0.95 each

Fork seals for 38mm Marzocchi / Ceriani forks, These are a quality replacement 7mm seal with double lip. £9.80 pair

Please note there are 2 seals per leg so you need 2 pairs for a set of forks.

Snap rings for 38mm forks , These are the rings used to retain the fork seals on both Marzocchi and Ceriani Forks  £1.95 each

A;lso available for 35mm forks £1.95 each

Stainless steel petrol caps, small seal version for Ducati/Laverda . I buy these in, dismantle them, get the outer cases professionally mirror polished and re assemble. As far as I know the original chrome lids are no longer available , these mirror polished Stainless options are the next best thing or maybe better and unique to ducatipaddy ( steel rule to show reflection only)

£58.00 each

Top bearing cover for yokes £4.30

Steering head stem nut £19.95

Steering head taper roller bearing.

Quality SKF taper roller bearings . These are head bearings for Darmah/SS/860 etc. You don't want to have to fit these twice so fit quality. £26.00 each

Stainless steel Darmah front mudguard few marks from use over the years but no dents or scuffs so would buff up like new. £210.00

Also fits Laverda Triples and 860/900GTS Ducati.

Marzocchi top nut with hole for fairing support £19.95

Bevel twin exhaust nut all models £32.00 each

Rare opportunity, NOS 38mm Marzocchi top yokes, later logo so original fitment for 900S2 and later MHR but will fit  and Darmah or SS/MHR.

Ideal if you are converting a Darmah from normal bars to clip ons or building a special. These will need a repaint to be perfect as paint is chipped from storage but they are brand new. £185.00 each

Darmah Dash/ Warning light housing with bar clamp and plastic back panel.

Excellent condition, ready to fit and very rare now £165.00

Darmah clock mounting bracket  in excellent condition. £95.00                                                         

Frame and cyle Parts