The place to buy your classic bike Brembo and Dellorto parts on line

dp

dp

I have to point out while a lot of these calipers are brand new, some are used because that's all that's available. Please take care fitting brake parts.

Warning

This part needs to be careful checked before fitting and use, it is a used brake part and should be treated as such. Do not use on the road till you are 100% happy with its safety and operation.

Warning

This part needs to be careful checked before fitting and use, it is a used brake part and should be treated as such. Do not use on the road till you are 100% happy with its safety and operation.

Brand New P08 Brembo Rear or RHS in front of forks PO8 single nipple. These come with pads and pins etc and are ready to fit £154.00 each

Ducati and leverda as well as some Guzzi’s

Brand New P08 Brembo LHS in front of forks PO8 single nipple. These come with pads and pins etc and are ready to fit £154.00 each

Ducati and leverda as well as some Guzzi’s

Brand New PO5 calipers Left and right pair. These are a close match for the original but do not have the Brembo logo cast in. They come with pins but no pads.  £110.00 each or £200.00 a pair

Single bleed nipple PO8 with new seals and pistons.

 Pads and pins/spring, covers available separately £75.00

Getting hard to find now Brembo P05 in good condition, teflon pistons, new seals, new nipple

Pads and pins/spring ,covers available separately  £90.00

Brand New P2 108 symmetric callper used on the rear of the Paso these are an ideal replacement for the Scarab units on the GT750, complete with pads ,pins, springs. These use the same pads ,pistons and seals as the P08

£149.00 each

Brand New  Brembo P4 30/34 single pin 40mm mounting centre callipers

Ideal for up grading your P08 using the adapters HERE

These come complete with pads pins etc read to fit. £170 each

Brembo P4 30/34 Gold used from a 748 but used on a wide variety of Ducati’s and Moto Guzzi’s.  These have been stripped, the pistons and seals are immaculate, rebuilt with stainless steel bolts and bleed nipples and supplied with pins and springs. £160.00 pair

65mm mounting centres. Pads available separately

Serious stopping power  from Brembo P4 34/34 calipers used

Std fit to Ducati 996R, 998S, 999S and many more.

These have been stripped, pistons removed and checked, fitted with new Stainless nipples and supplied with pins and springs. A new pair of these would cost you over £400.00 these are just £175.00 pair

Brand New P08 Gold for later MHR and some Laverda’s These are brand new complete with pads and pins etc. . They are from several different batches and are different shades of gold so not matched, fine for rears or singles.  Special offer , £175 each

Brembo P4 30/34 Black used from a Multistrada but used on a wide variety of Ducati’s and Moto Guzzi’s.  These have been stripped, the pistons and seals are immaculate, rebuilt with stainless steel bolts and bleed nipples , supplied with new pins  and springs. £160.00 pair

65mm mounting centres. Pads available separately

Brembo Moto Guzzi brake compensator valve £46.00

Brand New  Brembo P4 30/34 single pin 40mm mounting centre callipers

Ideal for up grading your P08 using the adapters HERE

These come complete with pads pins etc read to fit. £170 each

Brembo  P32  Black Rear Brake Caliper  32mm Pistons and 84mm Mounting Spacing.  Top Left hand side  Inlet and Bleed. With pads and pins/spring   £129.00

Part Number(s) 20516171

Brembo  P32 Gold  Current Rear Brake Caliper  32mm Pistons and 84mm Mounting Spacing.  Top Right hand side  Inlet and Bleed. With pads and pins/spring   £129.00

Part Number(s) 61140024A

Brembo  P32  Black Rear Brake Caliper  32mm Pistons and 84mm Mounting Spacing.  Top Right hand side  Inlet and Bleed. With pads and pins/spring   £129.00

Part Number(s) 20516181

10mm copper crush washers, fitting a new caliper ? You really shouldn't re use these especially as they are just 25p each

High Quality M10 x1 Stainless double banjo bolt with 4 crush washers £5.45

P08 Halo Caliper

LHS in front of forks. Stripped and re anodised with new Teflon coated Alloy pistons, new seals and genuine Brembo nipples and caps , supplied with re plated pins and springs. Un-threaded for Marzocchi forks. £195.00

Brand New P09

Brand new P09 calipers. These are reproduction but identical to the originals and take std Brembo spares, pads pins, pistons, seals. They come with new pins and spring, pad covers but no pads (available under Brembo spares here)  these will replace P08’s  £147.00 each

P4 32D Pair

These were where it all started for Brembo and 4 pot calipers in 1978.

Excellent condition these have stainless joining bolts nipples, and pad pins and come with stainless banjo bolts and new copper washers. These are ideal for period historic racers or any one restoring a very early 851. 40mm mounts the same as the later 30/34 calipers.

Really hard to find in this condition now £340.00 Pair

Brembo P2/34 rear calipers

Symetrical design so bleed nipple can be swaped with inlet fitting to mount left or right

34mm pistons with bigger pad area than the P2/32. Std fit on Ducati 1098 and others, complete with pads and pins/spring  £138.00

P05  or  P32 used

This is a symmetrical casting LH feed P32 2 x32mm pistons with 84mm mounting centres  idea for TT1/2 replica and others the feed is to the front when mounted upside down and these have the early logo. Supplied with new seals, Carbon Ceramic genuine Brembo pads and new pins and spring, Stainless nipple and new cap £155.00

P4 32D Gold used

An excellent pair of P432’s in gold with new genuine Brembo carbon ceramic pads and nipples, great for a TT 1 or 2 or classic race bike 40mm mounting centres and 2x 32mm pistons.£425.00 pair

Conversion brackets available to mount these in place of P08. On Marzocchi 38mm forks.  

Brand New and Exclusive to Calipers and carbs

These are Cerakoted (Ceramic coated) semi gloss Black new P4 30/34 Brembo with 40mm mounts. For those who want to upgrade their classic 2 pot calipers to 4 pot but don’t want he bling of Gold or Titanium. Supplied ready to fit with pads /springs pins £370.00 pair

Brand New and Exclusive to Calipers and carbs

These are Cerakoted (Ceramic coated) semi gloss Black new P4 30/34 Brembo with 40mm mounts. For those who want to upgrade their classic 2 pot calipers to 4 pot but don’t want he bling of Gold or Titanium. Supplied ready to fit with pads /springs pins £370.00 pair with Red lettering. 1 Pair only

1 pair only, NOS P30/34 Gold 40 mm mount pair complete with new pins, pads, stainless joining screws.

Brand new very slight mismatch in colour barely noticeable £295 pair.

P08 Halo Caliper

RHS in front of forks. Stripped and re anodised with new Teflon coated Alloy pistons, new seals and nipples and caps , supplied with re plated pins and springs. Un-threaded for Marzocchi forks. Near perfect condition £245.00

P05  or  P32 used

This is a symmetrical casting LH feed P32 2 x32mm pistons with 84mm mounting centres idea for TT1/2 replica and others the feed is to the front when mounted upside down and these have the early logo. New pistons and seal supplied, sold as per picture with black fittings, pads and pins extra £135.00

P05  or  P32 used

This is a rare non symmetrical casting LH feed P32 2 x32mm pistons with 84mm mounting centres used on the Bimota DB1 and idea for TT1/2 replica and others the feed is to the front when mounted upside down and these have the early logo. Supplied with new pistons and seals, pads and pins/spring as well as pad cover Stainless banjo bolt and copper washers £175.00

P4 32D Gold used

An good used  pair of P432’s in gold with good used pads, new black nipples and fixing bolts, great for a TT 1 or 2 or classic race bike 40mm mounting centres and 2x 32mm pistons. Some surface pitting to the castings but mostly to the rear and adds a bit of character to these if you are not building a show bike. £295.00 pair

Conversion brackets available to mount these in place of P08. On Marzocchi 38mm forks.  

High Quality M10 x1 Stainless single banjo bolt with 2 crush washers £4.45

Caliper conversion brackets, these allow you to fit P4 30/34 calipers to P08 mounts Hard alloy anodised black £87.00 Pair

This will fit 300mm discs or 280mm discs depending on which way up they are mounted

Rebuilt and re anodised Halo  caliper with new pistons and seals RHS in front of forks, none threaded to suit Marzocchi forks.  £210.00

This caliper has been upgraded with M7 stainless nipples. These are about 50% stronger than the original M6 but have the same 10mm spanner size hex so look original.

Available as in the pictures or with pins pads, banjo bolt etc.

Rebuilt and re anodised twin nipple later caliper with new pistons and seals RHS in front of forks, none threaded to suit Marzocchi forks. £165.00

This caliper has been upgraded with M7 stainless nipples. These are about 50% stronger than the original M6 but have the same 10mm spanner size hex so look original.

Good early handed rear P05 with Brembo lettering and no logo.

Good clean condition with new Alloy pistons, new seal kit, pins and springs, nipple and cap. Ready to fit £125.00

Rebuilt and re anodised twin nipple later caliper with new pistons and seals RHS in front of forks, none threaded to suit Ceriani forks. £165.00

Rebuilt and re anodised twin nipple later caliper with new pistons and seals RHS in front of forks, none threaded to suit Marzocchi forks. £165.00

Brake Calipers

Special Offer

2 pot Calipers

4 pot Calipers

2 pot Rear Calipers

Set of 3 shaved calipers. These started out as std twin nipple calipers which I machined down to replicate the shaved version for a project for myself, now no longer needed.They have new pistons and seals, stainless pin sets and joining bolts, new nipples and caps as well as new pads. Non threaded for Marzocchi forks. £450.00 set