The place to buy your classic bike Brembo and Dellorto parts on line

dp

dp

Brembo PS15 front caps and bellows

Now available again. Not Brembo but excellent copy cap and bellows set

£14.95

New Brembo PO.8 Calliper pad covers, twin nipple £4.90

 Brembo PS15 front and rear master cylinder piston and seal kit £24.50

NEW PS12/13 front and PS15 rear caps with bellows  £13.75

NEW P0.8 pin kits Black  £9.75

PS12 master cylinder kit £23.50

New Brembo PO.8 Calliper seal kit £18.50  

New Brembo PO.8  Teflon piston set £23.95

NEW Carbon Ceramic pads for PO8 callipers. Genuine Brembo. £22.50 a pair (one calliper)

CC The carbon-ceramic compound has evolved from the previous organic compound, thanks to its higher carbon content. This type of material features good durability, good performance hot and cold, wet and dry. It is has a slightly more progressive initial bite and is slightly less aggressive than the sintered pad and is compatible with both steel and cast iron discs.

If you want your Brembo’s to stop you like Brembo’s then fit genuine Brembo pads.

A selection of new parts in stock for bevel and Pantah owners. A lot of these parts will suit period Laverda Guzzi and Bimota owners as well but please check your application. Parts can be returned only if unopened.

NOS 35ml remote reservoirs twin mounting points £13.50

NOS 15ml (small) remote reservoirs £6.00 each

NOS 30ml remote reservoirs single mounting point Great for TT1 or 2 fork top mount £13.50

New front brake pressure switches for Guzzi, Ducati, laverda with Brembo fitting ie: M10x1

Fit using a new copper seal washer (not supplied) as you would a std brake banjo.

£17.50 NEW

Brake pressure switches to fit the Scarab splitter also available on this site. These have an imperial thread.   £17.50 NEW

PO5 Aluminium anodised piston sets . These are now after market as Brembo has stopped production of the originals.  These are 32mm for brembo P05/ Grimica £22.00 pair ( 1 calliper )

PO5 Calliper pin sets £7.50

PO5 caliper seal kits £17.75

New Brembo PO.8 caliper cover for single nipple £7.20

PO.9 Caliper seal repair kit

PO.9 callipers are used on the rear of some Guzzi’s, Benelli’s, Laverda’s £26.95

These are pattern parts fully compatable with Brembo.

PO.9 Caliper pistons

PO.9 callipers are used on the rear of some Guzzi’s, Benelli’s, Laverda’s £29.95 pair

These are pattern parts fully compatable with Brembo.

PS15 front master cylinder bowl repair kit. £24.95


Please note these parts are not marked Brembo but are remanufactured to the original spec and are fully interchangeable with Brembo parts and master cylinders.

PS12 front master cylinder bowl repair kit. £24.95


Please note these parts are not marked Brembo but are remanufactured to the original spec and are fully interchangeable with Brembo parts and master cylinders. kit

Set of 6 elctro polished stainless cap heads to replace the BZP cap heads used for holding Brembo PO8 calipers together £12.00 set

Stainless steel bolts for  joining calliper halves on modem 4 pot Brembo’s.

These are special low head style cap heads as fitted originally £1.00 each

90 degree remote reservoir fittings for front and rear master cylinders  £6.00 each

Rubber bellows used on rear master cylinders with rod operation .Short version £4.35 each

Genuine Brembo Carbon ceramic pads for 30/34 4 pot callipers Single pin 750SS/900SS/ 748/916 etc £24.45 Pair (per calliper)

Guzzi PS15 rear master cylinder arm  kit £21.95

Brake pad pins and clips for  2 pin 4 pots P4 30/34 calipers £9.95 pair

Brake pad pin and clip for  single pin 4 pots P4 30/34 calipers £4.75 each

Standard bar clamp for later rectangular reservoir master cylinders £13.75 each

Stainless steel screws for  joining calliper halves on modem 4 pot Brembo’s.  These are Torx head which are more durable than allen cap heads and lopok better.

These are special low head style heads as fitted originally  to later calipers £1.45 each

Genuine Brembo  nipple caps one size fits M6, M8, M10. £1.00 each

M10 x 1mm Stainless steel nipples for single nipple PO8 calipers. £8.00 each

Underside of hex to tip 22mm. Please not ideally these would be 20mm but I cant get them in the slightly shorter length.

Rubber bellows used on rear master cylinders with rod operation. Long version £4.95 each

NEW Carbon Ceramic pads for PO5 callipers. Genuine Brembo. £21.50 a pair (one calliper)

CC The carbon-ceramic compound has evolved from the previous organic compound, thanks to its higher carbon content. This type of material features good durability, good performance hot and cold, wet and dry. It is has a slightly more progressive initial bite and is slightly less aggressive than the sintered pad and is compatible with both steel and cast iron discs.

If you want your Brembo’s to stop you like Brembo’s then fit genuine Brembo pads.

M6 x 1 BZP steel Genuine Brembo bleed nipples with rubber boots, supplied in pairs. £9.30 pair

Brembo PS15 rear master cylinder piston and seal kit. Used in some rod operation Master cylinders with remote reservoirs Benelli, Bimota etc £24.50

Brembo Part No. 10377310

New Brake reservoir, 45ml std equip on Most Guzzi’s, Ducati 900 916 etc Apr RSV1000 etc £19.95 with cap bellows and screws.



New in. Rear brembo fitting M10x1 pressure switches with banjo fitting

£18.50 NEW

10mm copper crush washers, fitting a new caliper ? You really shouldn't re use these especially as they are just 30p each

High Quality M10 x1 Stainless double banjo bolt with 4 crush washers £6.45

High Quality M10 x1 Stainlesssingle banjo bolt with 2 crush washers £5.45

Pad spring for single pin 30/34 caliper £7.35 each

Genuine Brembo Carbon ceramic pads for 30/34 4 pot callipers double pin 750SS/900SS/ 748/916 etc £24.45 Pair (per calliper)

1 only. Good USED Guzzi PS15 lid with working float switch £28.00

Genuine Brembo clutch master cylinder kits PS13  P/No. 10436270

These are only for use in the clutch master cylinders part No. 10467014 £22.45

Bimota DB2 1993

Bimota DB2 SR 1994

Cagiva Elefant 1988

Ducati 851 1989-1990

Ducati 907 I.E. 1990-1993

Ducati Monster 600 1993-1997

Ducati Paso 750 1987

Ducati Supersport 350 1992

Ducati Supersport 400 1995-1997

Ducati Supersport 600 1991-1997

Ducati Supersport 750 1991-1993

Ducati Supersport 900 1990-1997

Ducati SuperSport 900 SuperLight 1992-1997


I also stock complete new PS13 clutch master cylinders in with the Brake master cylinders

 M7x1 nipples,Stainless steel Underside of hex to tip 18mm

Useful if you have stripped your M6 threads in a P08

M10 x 1mm Stainless steel nipples for 4 pot calipers 30/34 single and double pin. £8.00 each

Underside of hex to tip 16mm


Nipple caps with retaining loops for 8mm and 10mm nipples. £1.25 each

 M8x1.25 15mm Genuine brembo black nipples for some P4 SPECIAL OFFER £5.00 each with rubber caps.

P09 Pads.

Genuine Brembo P09 pads, Carbon Ceramic   £32.00 pair

Brembo Carbon Ceramic pads for rear P2/34, Ducati 1098 etc. £19.95 pair

Original brembo splitters, stripped , re anodised. Brembo 4 way brake splitter anodised black 4x M10 x1 fittings £32.40 each

Pin and spring set for Rear P32 F £9.95

Pin and spring set for Rear P32 G  £9.95

P09 Pin set


These are slightly longer than the P08 version but can also be used on the P08, Zinc plated £8.50 set

New in

P05 pad covers £6.25 each

Remote reservoir lids and bellows for 15ml reservoirs. These have a 35mm thread

P/No. 10.2704.50 4 also 110430880  £4.50 special offer

Reservoir lid and bellows for  rectangular type. These measure 55mm x 33mm with 43mm hole centres. £12.95 each

M10 x 1 Black with cap. Genuine Brembo

16mm from underside of hex to tip

M6 colour passivate

16mm from underside of hex to tip

Pivot pin and circlips used on 900SS/Darmah rear master cylinder , also some Laverda and guzzi rear cylinders £4.25 set

EBC organic pads for P08 calipers, these are none sintered so fine for cast iron discs. £17.49 pair

Universal pressure switch in std Brembo M10 x 1mm thread with leads, alloy construction £9.95

PS 11C rear master cylinder £22.45


Ducati 748 SP, Biposto

Ducati 750 SS `92

Ducati 750 SS `94

Ducati 888 `93->

Ducati 900 SS `92

Ducati 900 SS/SL `94-`97

Ducati 916 `94

Ducati 916 Monop.-Senna `95-

Ducati 916 SP `96

Ducati Monster 900 `93

Ducati Monster 900 `94


PS11A rear master cylinder £22.45


Ducati 750 Monster , BJ 1996 - 2001

Ducati 750 Monster Dark , BJ 1996 - 2001

Ducati 750 Monster Metallic , BJ 1996 - 2001

Ducati 900 Monster , BJ 1993 - 1999

Ducati 900 Monster Cromo , BJ 1998 - 1999

Ducati 900 Monster Dark , BJ 1999 - 1999

Ducati 900 Monster S , BJ 1998 - 1999

Replacement o-ring for bowl ps15/17 round front master cylinders £2.95

New Brembo Parts

P05 2 piston Caliper Spares

P08 2 piston Caliper Spares

P09 2 piston Caliper Spares

PS12 Master cylinder Spares

PS15 Master cylinder Spares

Bleed Nipples

Other Parts

Set of 6 stainless cap heads to replace the BZP cap heads used for holding Brembo PO5 calipers together £12.00 set

Brake pad pin retaining R clips

1mm dia Stainless steel, 17mm overall length £0.95p each

Coffin type later front brake light micro switch these are brand new genuine Brembo £17.35 each

Master cylinder return spring overall length 70mm £4.95 each

Master cylinder return spring overall length 50mm £3.95 each

NEW  EBC organic pads for Shaved Calipers and cast iron discs. 7.5mm thick especially for P08 shaved SS calipers. £23.95 pair (one disc)

NEW EBC organic pads for P05 calipers front or rear. £16.95 pair (one disc)

Bracket for 30ml reservoir used on the clutch side

916/996 and others

Bracket only £17.50

Bracket for 45ml reservoir used on the brake side

916/996 and others

Bracket only £17.50

Rubber mount for  fluid reservoir with screw and nut

£13.50